SKS3200-8E1X
9-Ports 2.5G/10G Smart Managed switch
| Product Specification | |
| Product name | XikeStor SKS3200-8E1X Smart Managed Switch |
| Connector |
8*10M/100M/1000M/2.5Gbps self-negotiating RJ45 ports
1*1000M/2.5G/10Gbps SFP+ fibre optical module expansion port
|
| Network Media (Cables) |
10Base-T : Cat3, 4, 5 or above UTP/STP(≤100m)
100Base-TX : Cat5 or above UTP/STP(≤100m)
1000Base-TX : Cat5 or above UTP/STP(≤100m)
2.5GBase-T : Cat5e or above UTP/STP(≤100m)
5GBase-T: Cat6 or above UTP/STP(≤100m)
10GBase-T: Cat6a or above UTP/STP(≤100m)
|
| Standard |
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3bz IEEE802.3ae, IEEE802.3x, IEEE802.1bz |
| Indicator light | PWR , LNK/ACT |
| MAC address table | 4K |
| Jumbo Frame | 12KByte |
| Packet Cache | 8Mbit |
| Transfer mode | store-and-forward |
| Packet forwarding ratio | 44.64Mpps |
| Switching capacity | 60Gbps |
| Dimension(L*W*H) | 156(L)x94(W)x30.7(H) mm |
| Input Voltage | External Adapter DC 12V/1A |
|
Operating temperature
0°C ~ 40°C
Storage temperature
-40°C ~ 70°C
|
|
|
Operating humidity
10% ~ 90% non-condensing
Storage humidity
5% ~ 90% No condensation
|
|
| L2 function | |
| Ports |
Port Switch Configuration \Port Rate Configuration
Port Duplex Configuration \Port Flow Control Configuration
Jumbo frames, up to 16356bytes supported \EEE
|
| Link aggregation |
Static Aggregation Groups \ Maximum 2 aggregation groups
Maximum 4 members per aggregation group
|
| Storm control | Broadcast Suppression \Unknown Multicast \Unknown Unicast |
| Port security | MAC address restriction |
| VLAN |
Access\Trunk\Hybrid
VLAN range 1-4094, maximum active VLAN is 31
|
| MAC address | Dynamic MAC Address \Static MAC Address |
| Spanning tree protocol | STP\RSTP\Edge Port |
| Multicast | IGMP Snnoping\IGMP V1/V2\Routed Ports \Static Join |
| Qos |
Traffic classification with SP and WRR scheduling support
Port Priority \Supports up to 8 queues per port
|
|
Port Isolation
Port Speed Limiting
Loop Detection
Port mirroring
|
|
* The data and product performance quoted in the above introduction are the performance of the products
under specific experimental environments
of specific equipment, which may vary based on the actual environment or equipment on site, and the
technical comparisons mentioned are all explanations of scientific principles and do not involve other purposes.
The third-party product information mentioned above, such as flagship models, carrier bandwidth, etc.,
are all statistical information from mainstream
manufacturers as of the official release date of the product.
There may be more than one version of the same model, the product pictures and APP/software interface in
the above pages are for illustration only, the
physical product (including but not limited to appearance, colour) and APP/software interface (including
but not limited to Ul, illustrations) may be
slightly different, please refer to the physical object.
Due to real-time changes in product versions, batches, production and supply factors, in order to
provide accurate product information, functional parameters and appearance details as much as possible, XikeStor may adjust the content of the above pages
in real time, such as text expressions and picture effects, in order to be consistent with the actual product. Adjustments may be made without prior
notice.
Due to the measurement environment, measurement methods and other factors, product dimensions,
parameters and other information may be subject
to certain scientific errors.